Bobcat E10 Excavator

Category: Comparison Excavators Tags: excavator, mini, mini excavator, zero tail Brand: Bobcat

Check out the Bobcat Website for more info on the Bobcat E10 Excavator.

Or check out our Tsunami equivalent models!

Engine	Kubota / D722-E4B-BCZ-6
Cylinders	3
Displacement	43.9 cu-in, 0.72 L
Net Horsepower @ RPM	10.2 hp, 7.6 Kw @ 2,000 RPM
Travel speeds Low/High	Low: 2.1 km/h, 1.3 mph High: 2.8 km/h, 1.7 mph
Max traction force Low	– lb., – kg
Gradeability	25 degrees
Ground pressure Canopy/Cab	4.2 psi, 29.0 kpa – psi, – kP
Pump Type	Gear
Pump Flow, Piston	– gpm, – L/min
Pump Flow, Gear	Gear 1: 2.6 gpm, 10.0 L/min Gear 2: 2.6 gpm, 10.0 L/min
System Pressure	2,756 psi, 190 bar
Auxiliary Flow	5.3 gpm, 20.0 L/m @ 2,370 RPM – gpm, – L/m @ – RPM
Operating Weight - Canopy	2,593 lb., 1,176 kg
Operating Weight - Cab	– lb., – kg
Overall Height	7 ft. 3 in., 2.21 m
Minimum Overall transport length	9 ft. 2 in., 2.79 m
Width of Upper Structure	2 ft. 4 in., 0.71 m
Track Overall Length	4 ft. 2 in., 1.28 m
Track Overall Width (retracted /extended)	2 ft. 4 in., 0.71 m / 3 ft. 7 in., 1.10 m
Track Shoe Width	7 in., 0.18 m
Center to Center - Idler to Sprocket	3 ft. 2 in., 0.97 m
Upper Structure Ground Clearance	1 ft. 2 in., 0.36 m
Minimum Ground Clearance	6 in., 0.15 m *
Boom Swing Left / Right	67 degrees / 64 degrees
Arm / Stick / Dipper Length Standard Arm Long	– ft. – in., – m – ft. – in., – m
Radius: Standard Counterweight/Additional Counterweight	1 ft. 10 in., 0.55 m – ft. – in., – m
Tail Swing Overhang: Standard Counterweight/Additional Counterweight	0 in., 0 cm – in., – cm
Blade height	8.6 in., 0.22 m
Blade Width: Standard / With Extensions	2 ft. 4 in., 0.70 m 3 ft. 7 in., 1.10 m
Blade: Bottom Highest/Lowest Position	7.7 in., 0.196 m / 9.1 in., 0.230 m
Maximum Dig Radius / Max Reach: Standard Arm / Long Arm	10 ft. 4 in., 3.15 m – ft. – in., – m
Maximum Ground Level Dig Radius/Reach: Standard Arm/Long Arm	10 ft. 2 in., 3.09 m – ft. – in., – m
Maximum Digging Depth: Standard Arm/Long Arm	6 ft. 0 in., 1.82 m – ft. – in., – m
Maximum Digging Hight: Standard Arm/Long Arm	8 ft. 10 in., 2.69 m – ft. – in., – m
Maximum Dump Hight: Standard Arm/Long Arm	6 ft. 0 in., 1.82 m – ft. – in., – m
Minimum swing radius	4 ft. 6 in., 1.37 m
Arm /Stick Digging Force: Standard Arm/Long Arm	1,248 lbf, 5.5 kN – lbf, – kN
Arm/Stick Breakout Force	– lbf, – kN
Bucket Digging Force	1,865 lbf, 8.3 kN
Bucket Breakout Force	– lbf, – kN
Rated Lifting Capacity: 3m (9.8ft) radius, over front, blade down at ground level	925 lb, 420 kg
Swing/Slewing Speed	9.0 RPM
Hydraulic Oil Capacity: Tank/System	2.6 qt., 2.8 L 2.5 gal, 9.4 L
Fuel Tank Capacity	4.25 gal, 15.9 L
Engine Oil Capacity, Including Filter	3.0 qt., 2.8 L
Operator Sound Pressure (ISO 6396:2008)	80 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	93 dB(A)
Assumed or not Certain Value	*

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Quick Comparison

Bobcat E10 Excavator remove Kubota 10-5 Excavator remove Cat 300.9D Excavator remove EZ11G 1.1 Ton Excavator - Canopy remove

Name Bobcat E10 Excavator remove Kubota 10-5 Excavator remove Cat 300.9D Excavator remove EZ11G 1.1 Ton Excavator - Canopy remove

Image

Price $14,000.00

Rating

Add to cart

Description

Additional information

Engine	Kubota / D722-E4B-BCZ-6
Cylinders	3
Displacement	43.9 cu-in, 0.72 L
Net Horsepower @ RPM	10.2 hp, 7.6 Kw @ 2,000 RPM
Travel speeds Low/High	Low: 2.1 km/h, 1.3 mph High: 2.8 km/h, 1.7 mph
Max traction force Low	– lb., – kg
Gradeability	25 degrees
Ground pressure Canopy/Cab	4.2 psi, 29.0 kpa – psi, – kP
Pump Type	Gear
Pump Flow, Piston	– gpm, – L/min
Pump Flow, Gear	Gear 1: 2.6 gpm, 10.0 L/min Gear 2: 2.6 gpm, 10.0 L/min
System Pressure	2,756 psi, 190 bar
Auxiliary Flow	5.3 gpm, 20.0 L/m @ 2,370 RPM – gpm, – L/m @ – RPM
Operating Weight - Canopy	2,593 lb., 1,176 kg
Operating Weight - Cab	– lb., – kg
Overall Height	7 ft. 3 in., 2.21 m
Minimum Overall transport length	9 ft. 2 in., 2.79 m
Width of Upper Structure	2 ft. 4 in., 0.71 m
Track Overall Length	4 ft. 2 in., 1.28 m
Track Overall Width (retracted /extended)	2 ft. 4 in., 0.71 m / 3 ft. 7 in., 1.10 m
Track Shoe Width	7 in., 0.18 m
Center to Center - Idler to Sprocket	3 ft. 2 in., 0.97 m
Upper Structure Ground Clearance	1 ft. 2 in., 0.36 m
Minimum Ground Clearance	6 in., 0.15 m *
Boom Swing Left / Right	67 degrees / 64 degrees
Arm / Stick / Dipper Length Standard Arm Long	– ft. – in., – m – ft. – in., – m
Radius: Standard Counterweight/Additional Counterweight	1 ft. 10 in., 0.55 m – ft. – in., – m
Tail Swing Overhang: Standard Counterweight/Additional Counterweight	0 in., 0 cm – in., – cm
Blade height	8.6 in., 0.22 m
Blade Width: Standard / With Extensions	2 ft. 4 in., 0.70 m 3 ft. 7 in., 1.10 m
Blade: Bottom Highest/Lowest Position	7.7 in., 0.196 m / 9.1 in., 0.230 m
Maximum Dig Radius / Max Reach: Standard Arm / Long Arm	10 ft. 4 in., 3.15 m – ft. – in., – m
Maximum Ground Level Dig Radius/Reach: Standard Arm/Long Arm	10 ft. 2 in., 3.09 m – ft. – in., – m
Maximum Digging Depth: Standard Arm/Long Arm	6 ft. 0 in., 1.82 m – ft. – in., – m
Maximum Digging Hight: Standard Arm/Long Arm	8 ft. 10 in., 2.69 m – ft. – in., – m
Maximum Dump Hight: Standard Arm/Long Arm	6 ft. 0 in., 1.82 m – ft. – in., – m
Minimum swing radius	4 ft. 6 in., 1.37 m
Arm /Stick Digging Force: Standard Arm/Long Arm	1,248 lbf, 5.5 kN – lbf, – kN
Arm/Stick Breakout Force	– lbf, – kN
Bucket Digging Force	1,865 lbf, 8.3 kN
Bucket Breakout Force	– lbf, – kN
Rated Lifting Capacity: 3m (9.8ft) radius, over front, blade down at ground level	925 lb, 420 kg
Swing/Slewing Speed	9.0 RPM
Hydraulic Oil Capacity: Tank/System	2.6 qt., 2.8 L 2.5 gal, 9.4 L
Fuel Tank Capacity	4.25 gal, 15.9 L
Engine Oil Capacity, Including Filter	3.0 qt., 2.8 L
Operator Sound Pressure (ISO 6396:2008)	80 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	93 dB(A)
Assumed or not Certain Value	*

Engine	Kubota D722-E4-BH-5US
Cylinders	3
Displacement	43.8 cu-in, 0.719 L
Net Horsepower @ RPM	10.1 hp, 7.5Kw @ 2,050 RPM
Travel speeds Low/High	Low: 2.0 km/h, 1.2 mph High: 4.0 km/h, 2.5 mph
Max traction force Low	– lb., – kg
Gradeability	30 degrees
Ground pressure Canopy/Cab	4.2 psi, 29.0 kpa – psi, – kP
Pump Type	Gear
Pump Flow, Piston	N/A
Pump Flow, Gear	Gear 1: 2.8 gpm, 10.5 L/min Gear 2: 2.8 gpm, 10.5 L/min Gear 3: 0.8 gpm, 3.1 L/min
System Pressure	2,494 psi (, 72 bar
Auxiliary Flow	5.5 gpm, 21.0 L/m @ 2,050 RPM – gpm, – L/m @ – RPM
Operating Weight - Canopy	2,646 lb., 1,200kg
Operating Weight - Cab	– lb., – kg
Overall Height	7 ft. 5 in., 2.26 m
Minimum Overall transport length	9 ft. 9 in., 2.98 m
Width of Upper Structure	2 ft. 6 in., 0.75 m
Track Overall Length	4 ft. 5 in., 1.34 m
Track Overall Width (retracted /extended)	2 ft. 6 in., 0.75 m / 3 ft. 3 in., 0.99 m
Track Shoe Width	7.1 in., 0.18 m
Center to Center - Idler to Sprocket	– ft. – in., – m
Upper Structure Ground Clearance	– ft. – in., – m
Minimum Ground Clearance	5.5 in., 0.14 m
Boom Swing Left / Right	55 degrees / 55 degrees
Arm / Stick / Dipper Length Standard Arm Long	– ft. – in., – m – ft. – in., – m
Radius: Standard Counterweight/Additional Counterweight	1 ft. 8 in., 0.51 m – ft. – in., – m
Tail Swing Overhang: Standard Counterweight/Additional Counterweight	0.59 in., 1.5 cm – in., – cm
Blade height	8 in., 0.20 m
Blade Width: Standard / With Extensions	2 ft. 6 in., 0.75 m 3 ft. 3 in., 0.99 m
Blade: Bottom Highest/Lowest Position	8.5 in., 0.215 m / 7.5 in., 0.190 m
Maximum Dig Radius / Max Reach: Standard Arm / Long Arm	11 ft. 1 in., 3.38 m – ft. – in., – m
Maximum Ground Level Dig Radius/Reach: Standard Arm/Long Arm	10 ft. 11 in., 3.33 m – ft. – in., – m
Maximum Digging Depth: Standard Arm/Long Arm	5 ft. 11 in., 1.80 m – ft. – in., – m
Maximum Digging Hight: Standard Arm/Long Arm	10 ft. 0 in., 3.05 m – ft. – in., – m
Maximum Dump Hight: Standard Arm/Long Arm	7 ft. 3 in., 2.21 m – ft. – in., – m
Minimum swing radius	4 ft. 2 in., 1.26 m
Arm /Stick Digging Force: Standard Arm/Long Arm	– lbf, – kN – lbf, – kN
Arm/Stick Breakout Force	1,214 lbf, 5.4 kN
Bucket Digging Force	– lbf, – kN
Bucket Breakout Force	2,337 lbf, 10.4 kN
Rated Lifting Capacity: 3m (9.8ft) radius, over front, blade down at ground level	594 lb, 270 kg
Swing/Slewing Speed	8.3 RPM
Hydraulic Oil Capacity: Tank/System	3.3 gal, 12.6 L 4.5 gal, 17.1 L
Fuel Tank Capacity	3.2 gal, 12 L
Engine Oil Capacity, Including Filter	0.74 gal, 2.8 L
Operator Sound Pressure (ISO 6396:2008)	77 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	90 dB(A)
Assumed or not Certain Value	*

Engine	Yanmar 31NV70
Cylinders	3
Displacement	52.0 cu-in, 0.854 L
Net Horsepower @ RPM	13hp, 9.6 Kw @ 2,100 RPM
Travel speeds Low/High	Low: 1.8 km/h, 1.12 mph High: – km/h, – mph
Max traction force Low	– lb., – kg
Gradeability	30 degrees
Ground pressure Canopy/Cab	3.5 psi, 24.1 kpa – psi, – kP
Pump Type	Gear
Pump Flow, Piston	Gear 1: 3.0 gpm, 11.4 L/min Gear 2: 3.0 gpm, 11.4 L/min
Pump Flow, Gear	2,466 psi, 170 bar
System Pressure	– psi, – bar
Auxiliary Flow	– gpm, – L/m @ – RPM – gpm, – L/m @ – RPM
Operating Weight - Canopy	2,060 lb., 935 kg
Operating Weight - Cab	– lb., – kg
Overall Height	4 ft. 11 in., 1.51 m
Minimum Overall transport length	4 ft. 11 in., 1.51 m
Width of Upper Structure	2 ft. 4 in., 0.71 m
Track Overall Length	4 ft. 0 in., 1.22 m
Track Overall Width (retracted /extended)	2 ft. 4 in., 0.71 m / 2 ft. 8 in., 0.86 m
Track Shoe Width	7 in., 0.18 m
Center to Center - Idler to Sprocket	– ft. – in., – m
Upper Structure Ground Clearance	– ft. – in., – m
Minimum Ground Clearance	5 in., 0.13 m
Boom Swing Left / Right	55 degrees / 56 degrees
Arm / Stick / Dipper Length Standard Arm Long	2 ft. 11 in., 0.89 m – ft. – in., – m
Radius: Standard Counterweight/Additional Counterweight	2 ft. 4 in., 0.74 m – ft. – in., – m
Tail Swing Overhang: Standard Counterweight/Additional Counterweight	0 in., 0 cm – in., – cm
Blade height	8 in., 0.20 m
Blade Width: Standard / With Extensions	2 ft. 4 in., 0.70 m 2 ft. 8 in., 0.86 m
Blade: Bottom Highest/Lowest Position	8 in., 0.197 m / 7 in., 0.174 m
Maximum Dig Radius / Max Reach: Standard Arm / Long Arm	10 ft. 1 in., 3.07 m – ft. – in., – m
Maximum Ground Level Dig Radius/Reach: Standard Arm/Long Arm	9 ft. 11 in., 3.02 m – ft. – in., – m
Maximum Digging Depth: Standard Arm/Long Arm	5 ft. 8 in., 1.73 m – ft. – in., – m
Maximum Digging Hight: Standard Arm/Long Arm	9 ft. 5 in., 2.86 m – ft. – in., – m
Maximum Dump Hight: Standard Arm/Long Arm	6 ft. 8 in., 2.03 m – ft. – in., – m
Minimum swing radius	3 ft. 9 in., 1.15 m
Arm /Stick Digging Force: Standard Arm/Long Arm	1,011 lbf, 4.5 kN – lbf, – kN
Arm/Stick Breakout Force	– lbf, – kN
Bucket Digging Force	2,000 lbf, 8.9 kN
Bucket Breakout Force	– lbf, – kN
Rated Lifting Capacity: 3m (9.8ft) radius, over front, blade down at ground level	600 lb, 272 kg *
Swing/Slewing Speed	8.0 RPM
Hydraulic Oil Capacity: Tank/System	3.7 gal, 14.0 L – gal, – L
Fuel Tank Capacity	2.64 gal, 10 L
Engine Oil Capacity, Including Filter	– qt., – L
Operator Sound Pressure (ISO 6396:2008)	80 dB(A) *
Average Exterior Sound Pressure (ISO 6395:2008)	93 dB(A)
Assumed or not Certain Value	*

Engine	Briggs & Stratton XR2100
Cylinders	1
Displacement	25.6 cu-in, 0.420 L
Net Horsepower @ RPM	13.5 hp, 9.9Kw @ 3,000 RPM
Travel speeds Low/High	Low: 2.2 km/h, 1.4 mph N/A
Max traction force Low	– lb., – kg
Gradeability	30 degrees
Ground pressure Canopy/Cab	3.2 psi, 22.0 kpa – psi, – kP
Pump Type	Gear
Pump Flow, Piston	N/A
Pump Flow, Gear	Gear 1: – gpm, -L/min Gear 2: – gpm, -L/min
System Pressure	– psi, – bar
Auxiliary Flow	– gpm, – L/m @ – RPM – gpm, – L/m @ – RPM
Operating Weight - Canopy	– lb., – kg
Operating Weight - Cab	– lb., – kg
Overall Height	7 ft. 2 in., 2.2 m
Minimum Overall transport length	– ft. – in., – m
Width of Upper Structure	3 ft. 1 in., 0.94 m
Track Overall Length	4 ft. 0 in., 1.22 m
Track Overall Width (retracted /extended)	3 ft. 1 in., 0.94 m / – ft. -in., – m
Track Shoe Width	7 in., 0.18 m
Center to Center - Idler to Sprocket	– ft. – in., – m
Upper Structure Ground Clearance	– ft. – in., – m
Minimum Ground Clearance	6 in., 0.15 m
Boom Swing Left / Right	degrees / degrees
Arm / Stick / Dipper Length Standard Arm Long	– ft. – in., – m – ft. – in., – m
Radius: Standard Counterweight/Additional Counterweight	– ft. – in., – m – ft. – in., – m
Tail Swing Overhang: Standard Counterweight/Additional Counterweight	– in., – cm – in., – cm
Blade height	– in., – m
Blade Width: Standard / With Extensions	– in., – cm – in., – cm
Blade: Bottom Highest/Lowest Position	– in., – m / – in., – m
Maximum Dig Radius / Max Reach: Standard Arm / Long Arm	– ft. – in., – m – ft. – in., – m
Maximum Ground Level Dig Radius/Reach: Standard Arm/Long Arm	9 ft. 4 in., 2.84 m – ft. – in., – m
Maximum Digging Depth: Standard Arm/Long Arm	5 ft. 9 in., 1.75 m – ft. – in., – m
Maximum Digging Hight: Standard Arm/Long Arm	8 ft. 7 in., 2.62 m – ft. – in., – m
Maximum Dump Hight: Standard Arm/Long Arm	6 ft. 0 in., 1.82 m – ft. – in., – m
Minimum swing radius	– ft. – in., – m
Arm /Stick Digging Force: Standard Arm/Long Arm	– lbf, – kN – lbf, – kN
Arm/Stick Breakout Force	– lbf, – kN
Bucket Digging Force	– lbf, – kN
Bucket Breakout Force	– lbf, – kN
Rated Lifting Capacity: 3m (9.8ft) radius, over front, blade down at ground level	– lb, – kg
Swing/Slewing Speed	8.0 RPM
Hydraulic Oil Capacity: Tank/System	– qt., – L – gal, – L
Fuel Tank Capacity	1.71 gal, 6.46 L
Engine Oil Capacity, Including Filter	gal, – L
Operator Sound Pressure (ISO 6396:2008)	– dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	– dB(A)
Assumed or not Certain Value	*

Bobcat E10 Excavator

Reviews

Quick Comparison

Related products

Login