Cat 302 CR Excavator

Category: Comparison Excavators Tags: excavator, mini, mini excavator, zero tail Brand: Cat

Check out the Cat Website for more info on the Cat 302 CR Excavator

Or check out our Tsunami equivalent models!

Engine	CAT C1.1
Cylinders	3
Displacement	69.0 cu-in, 1.1 L
Net Horsepower @ RPM	21 hp, 15.7 Kw @ 2,400 RPM
Travel speeds Low/High	Low: 2.9 km/h, 1.8 mph High: 4.4 km/h, 2.7 mph
Max traction force Low	4,496 lb., 2,039 kg
Gradeability	30 degrees
Ground pressure Canopy/Cab	3.4 psi, 23.7 kPa 3.9 psi, 26.8 kP
Pump Type	Piston
Pump Flow, Piston	17.4 gpm, 66 L/m
Pump Flow, Gear	– gpm, – L/min
System Pressure	3,553 psi, 245 bar
Auxiliary Flow	8.7 gpm, 33 L/m @ 2,400 RPM 3.7 gpm, 14 L/m @ 2,400 RPM
Operating Weight - Canopy	4,229 lb., 1,918 kg
Operating Weight - Cab	4,535 lb., 2,057 kg
Overall Height	7 ft. 7 in., 2.30 m
Minimum Overall transport length	12 ft. 10 in., 3.90 m
Width of Upper Structure	3 ft. 7 in., 1.09 m
Track Overall Length	6 ft. 1 in., 1.85 m
Track Overall Width (retracted /extended)	3 ft. 7 in., 1.09 m / 4 ft. 7 in., 1.40 m
Track Shoe Width	9.8 in., 0.25 m
Center to Center - Idler to Sprocket	– ft. – in., – m
Upper Structure Ground Clearance	1 ft. 5 in., 0.44 m
Minimum Ground Clearance	5.9 in., 0.15 m
Boom Swing Left / Right	65 degrees / 50 degrees
Arm / Stick / Dipper Length Standard Arm Long	3 ft. 2 in., 0.96 m 3 ft. 10 in., 1.16 m
Radius: Standard Counterweight/Additional Counterweight	2 ft. 6 in., 0.75 m – ft. – in., – m
Tail Swing Overhang: Standard Counterweight/Additional Counterweight	1.97 in., 5 cm – in., – cm
Blade height	8.9 in., 0.225 m
Blade Width: Standard / With Extensions	3 ft. 7 in., 1.09 m 4 ft. 7 in., 1.40 m
Blade: Bottom Highest/Lowest Position	11.2 in., 0.285 m / 11.6 in., 0.295 m
Maximum Dig Radius / Max Reach: Standard Arm / Long Arm	13 ft. 6 in., 4.11 m 14 ft. 0 in., 4.27 m
Maximum Ground Level Dig Radius/Reach: Standard Arm/Long Arm	13 ft. 3 in., 4.04 m 13 ft. 10 in., 4.21 m
Maximum Digging Depth: Standard Arm/Long Arm	7 ft. 9 in., 2.37 m 8 ft. 5 in., 2.57 m
Maximum Digging Hight: Standard Arm/Long Arm	11 ft. 8 in., 3.55 m 11 ft. 11 in., 3.62 m
Maximum Dump Hight: Standard Arm/Long Arm	8 ft. 5 in., 2.56 m 8 ft. 8 in., 2.64 m
Minimum swing radius	5 ft. 5 in., 1.66 m
Arm /Stick Digging Force: Standard Arm/Long Arm	2,540 lbf, 11.3 kN 2,203 lbf, 9.8 kN
Arm/Stick Breakout Force	– lbf, – kN
Bucket Digging Force	4,406 lbf, 19.6 kN
Bucket Breakout Force	– lbf, – kN
Rated Lifting Capacity: 3m (9.8ft) radius, over front, blade down at ground level	1,000 lb, 454 kg *
Swing/Slewing Speed	9.8 RPM
Hydraulic Oil Capacity: Tank/System	4.8 gal, 18 L 6.9 gal, 6.0 L
Fuel Tank Capacity	6.9 gal, 26.0 L
Engine Oil Capacity, Including Filter	1.2 gal, 4.4 L
Operator Sound Pressure (ISO 6396:2008)	72 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	99 dB(A)
Assumed or not Certain Value	*

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Quick Comparison

Cat 302 CR Excavator remove Wacker Neuson ET20 Excavator remove Takeuchi TB225 Excavator remove Bobcat E20 Excavator remove Tsunami EZ20D 2.0 Ton Excavator - Canopy remove

Name Cat 302 CR Excavator remove Wacker Neuson ET20 Excavator remove Takeuchi TB225 Excavator remove Bobcat E20 Excavator remove Tsunami EZ20D 2.0 Ton Excavator - Canopy remove

Image

Price $27,000.00

Rating

Add to cart

Description

Additional information

Engine	CAT C1.1
Cylinders	3
Displacement	69.0 cu-in, 1.1 L
Net Horsepower @ RPM	21 hp, 15.7 Kw @ 2,400 RPM
Travel speeds Low/High	Low: 2.9 km/h, 1.8 mph High: 4.4 km/h, 2.7 mph
Max traction force Low	4,496 lb., 2,039 kg
Gradeability	30 degrees
Ground pressure Canopy/Cab	3.4 psi, 23.7 kPa 3.9 psi, 26.8 kP
Pump Type	Piston
Pump Flow, Piston	17.4 gpm, 66 L/m
Pump Flow, Gear	– gpm, – L/min
System Pressure	3,553 psi, 245 bar
Auxiliary Flow	8.7 gpm, 33 L/m @ 2,400 RPM 3.7 gpm, 14 L/m @ 2,400 RPM
Operating Weight - Canopy	4,229 lb., 1,918 kg
Operating Weight - Cab	4,535 lb., 2,057 kg
Overall Height	7 ft. 7 in., 2.30 m
Minimum Overall transport length	12 ft. 10 in., 3.90 m
Width of Upper Structure	3 ft. 7 in., 1.09 m
Track Overall Length	6 ft. 1 in., 1.85 m
Track Overall Width (retracted /extended)	3 ft. 7 in., 1.09 m / 4 ft. 7 in., 1.40 m
Track Shoe Width	9.8 in., 0.25 m
Center to Center - Idler to Sprocket	– ft. – in., – m
Upper Structure Ground Clearance	1 ft. 5 in., 0.44 m
Minimum Ground Clearance	5.9 in., 0.15 m
Boom Swing Left / Right	65 degrees / 50 degrees
Arm / Stick / Dipper Length Standard Arm Long	3 ft. 2 in., 0.96 m 3 ft. 10 in., 1.16 m
Radius: Standard Counterweight/Additional Counterweight	2 ft. 6 in., 0.75 m – ft. – in., – m
Tail Swing Overhang: Standard Counterweight/Additional Counterweight	1.97 in., 5 cm – in., – cm
Blade height	8.9 in., 0.225 m
Blade Width: Standard / With Extensions	3 ft. 7 in., 1.09 m 4 ft. 7 in., 1.40 m
Blade: Bottom Highest/Lowest Position	11.2 in., 0.285 m / 11.6 in., 0.295 m
Maximum Dig Radius / Max Reach: Standard Arm / Long Arm	13 ft. 6 in., 4.11 m 14 ft. 0 in., 4.27 m
Maximum Ground Level Dig Radius/Reach: Standard Arm/Long Arm	13 ft. 3 in., 4.04 m 13 ft. 10 in., 4.21 m
Maximum Digging Depth: Standard Arm/Long Arm	7 ft. 9 in., 2.37 m 8 ft. 5 in., 2.57 m
Maximum Digging Hight: Standard Arm/Long Arm	11 ft. 8 in., 3.55 m 11 ft. 11 in., 3.62 m
Maximum Dump Hight: Standard Arm/Long Arm	8 ft. 5 in., 2.56 m 8 ft. 8 in., 2.64 m
Minimum swing radius	5 ft. 5 in., 1.66 m
Arm /Stick Digging Force: Standard Arm/Long Arm	2,540 lbf, 11.3 kN 2,203 lbf, 9.8 kN
Arm/Stick Breakout Force	– lbf, – kN
Bucket Digging Force	4,406 lbf, 19.6 kN
Bucket Breakout Force	– lbf, – kN
Rated Lifting Capacity: 3m (9.8ft) radius, over front, blade down at ground level	1,000 lb, 454 kg *
Swing/Slewing Speed	9.8 RPM
Hydraulic Oil Capacity: Tank/System	4.8 gal, 18 L 6.9 gal, 6.0 L
Fuel Tank Capacity	6.9 gal, 26.0 L
Engine Oil Capacity, Including Filter	1.2 gal, 4.4 L
Operator Sound Pressure (ISO 6396:2008)	72 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	99 dB(A)
Assumed or not Certain Value	*

Engine	Yanmar 3TNV76-XNSV
Cylinders	3
Displacement	68.1 cu-in, 1.12 L
Net Horsepower @ RPM	18.5 hp, 13.8Kw @ 2,200 RPM
Travel speeds Low/High	Low: – km/h, – mph High: 4.1 km/h, 2.5 mph
Max traction force Low	– lb., – kg
Gradeability	30 degrees
Ground pressure Canopy/Cab	4.0 psi, 27.5 kpa – psi, – kP
Pump Type	2 Gear, Piston
Pump Flow, Piston	19.3 gpm, 73 L/m
Pump Flow, Gear	Gear 1: 5.0 gpm, 19.0 L/min Gear 2: 1.7 gpm, 6.4 L/min
System Pressure	2,900 psi, 200 bar
Auxiliary Flow	– gpm, – L/m @ – RPM – gpm, – L/m @ – RPM
Operating Weight - Canopy	4,420.3 lb., 2,005 kg
Operating Weight - Cab	– lb., – kg
Overall Height	8 ft. 1 in., 2.48 m
Minimum Overall transport length	13 ft. 3 in., 4.05 m
Width of Upper Structure	3 ft. 3 in., 0.99 m
Track Overall Length	5 ft. 7 in., 1.71 m
Track Overall Width (retracted /extended)	3 ft. 3 in., 0.99 m / 4 ft. 3 in., 1.30 m
Track Shoe Width	10 in., 0.25 m
Center to Center - Idler to Sprocket	4 ft. 4 in., 1.33 m
Upper Structure Ground Clearance	– ft. – in., – m
Minimum Ground Clearance	4 ft. 4 in., 1.33 m
Boom Swing Left / Right	77 degrees / 48 degrees
Arm / Stick / Dipper Length Standard Arm Long	– ft. – in., – m – ft. – in., – m
Radius: Standard Counterweight/Additional Counterweight	3 ft. 10 in., 1.17 m – ft. – in., – m
Tail Swing Overhang: Standard Counterweight/Additional Counterweight	0 in., 0 cm – in., – cm
Blade height	9.0 in., 0.23 m
Blade Width: Standard / With Extensions	3 ft. 3 in., 0.99 m 4 ft. 3 in., 1.30 m
Blade: Bottom Highest/Lowest Position	9 in., 0.22 m / 12 in., 0.30 m
Maximum Dig Radius / Max Reach: Standard Arm / Long Arm	13 ft. 6 in., 4.13 m 14 ft. 2 in., 4.32 m
Maximum Ground Level Dig Radius/Reach: Standard Arm/Long Arm	13 ft. 2 in., 4.03 m 13 ft. 10 in., 4.23 m
Maximum Digging Depth: Standard Arm/Long Arm	8 ft. 2 in., 2.48 m 8 ft. 10 in., 2.68 m
Maximum Digging Hight: Standard Arm/Long Arm	12 ft. 7 in., 3.84 m 12 ft. 11 in., 3.96 m
Maximum Dump Hight: Standard Arm/Long Arm	8 ft. 10 in., 2.71 m 9 ft. 4 in., 2.84 m
Minimum swing radius	5 ft. 6 in., 1.67 m
Arm /Stick Digging Force: Standard Arm/Long Arm	– lbf, – kN – lbf, – kN
Arm/Stick Breakout Force	2,810 lbf, 12.5 kN
Bucket Digging Force	– lbf, – kN
Bucket Breakout Force	4,226 lbf, 18.8 kN
Rated Lifting Capacity: 3m (9.8ft) radius, over front, blade down at ground level	1,067 lb, 484 kg
Swing/Slewing Speed	10 RPM
Hydraulic Oil Capacity: Tank/System	5 gal, 18.9 L 9 gal, 34 L
Fuel Tank Capacity	– gal, – L
Engine Oil Capacity, Including Filter	– gal, – L
Operator Sound Pressure (ISO 6396:2008)	77 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	93 dB(A)

Engine	Yanmar 3TNV80F
Cylinders	3
Displacement	77.3 cu-in, 1.267 L
Net Horsepower @ RPM	19.6 hp, 14.6 Kw @ 2,400 RPM
Travel speeds Low/High	Low: 2.5 km/h, 1.6 mph High: 4.2 km/h, 2.6 mph
Max traction force Low	6,003 lb., 2,723 kg
Gradeability	30 degrees
Ground pressure Canopy/Cab	4.2 psi, 29 kpa – psi, – kP
Pump Type	Piston
Pump Flow, Piston	16.6 gpm, 62.8 L/m
Pump Flow, Gear	– gpm, – L/min
System Pressure	3,045 psi, 210 bar
Auxiliary Flow	9.96 gpm, 37.7 L/m @ 2,400 RPM – gpm, – L/m @ – RPM
Operating Weight - Canopy	4,993 lb., 2,265 kg *
Operating Weight - Cab	– lb., – kg
Overall Height	7 ft. 9 in., 2.36 m
Minimum Overall transport length	13 ft. 9 in., 4.18 m
Width of Upper Structure	3 ft. 7 in., 1.09 m
Track Overall Length	5 ft. 10 in., 1.79 m
Track Overall Width (retracted /extended)	3 ft. 7 in., 1.09 m / 4 ft. 11 in., 1.50 m
Track Shoe Width	9.8 in., 0.25 m
Center to Center - Idler to Sprocket	4 ft. 8 in., 1.42 m
Upper Structure Ground Clearance	– ft. – in., – m
Minimum Ground Clearance	7.5 in., 0.19 m
Boom Swing Left / Right	75 degrees / 55 degrees
Arm / Stick / Dipper Length Standard Arm Long	4 ft. 1 in., 1.25 m – ft. – in., – m
Radius: Standard Counterweight/Additional Counterweight	4 ft. 1 in., 1.25 m – ft. – in., – m
Tail Swing Overhang: Standard Counterweight/Additional Counterweight	9.4 in., 24 cm – in., – cm
Blade height	– in., – m
Blade Width: Standard / With Extensions	– ft. – in., – m – ft. – in., – m
Blade: Bottom Highest/Lowest Position	– in., – m / – in., – m
Maximum Dig Radius / Max Reach: Standard Arm / Long Arm	14 ft. 4 in., 4.38 m – ft. – in., – m
Maximum Ground Level Dig Radius/Reach: Standard Arm/Long Arm	13 ft. 11 in., 4.25 m – ft. – in., – m
Maximum Digging Depth: Standard Arm/Long Arm	8 ft. 6 in., 2.58 m – ft. – in., – m
Maximum Digging Hight: Standard Arm/Long Arm	13 ft. 4 in., 4.06 m – ft. – in., – m
Maximum Dump Hight: Standard Arm/Long Arm	9 ft. 5 in., 2.88 m – ft. – in., – m
Minimum swing radius	6 ft. 0 in., 1.83 m
Arm /Stick Digging Force: Standard Arm/Long Arm	2,877 lbf, 12.8 kN – lbf, – kN
Arm/Stick Breakout Force	– lbf, – kN
Bucket Digging Force	4,339 lbf, 19.3 kN
Bucket Breakout Force	– lbf, – kN
Rated Lifting Capacity: 3m (9.8ft) radius, over front, blade down at ground level	1,540 lb, 700 kg *
Swing/Slewing Speed	8.9 RPM
Hydraulic Oil Capacity: Tank/System	6.87 gal, 26.0 L 11.9 gal, 45.0 L
Fuel Tank Capacity	8.1 gal, 30.5 L
Engine Oil Capacity, Including Filter	3.6 qt., 3.4 L
Operator Sound Pressure (ISO 6396:2008)	– dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	– dB(A)

Engine	Kubota D722-E2B-BCZ-7 *
Cylinders	3
Displacement	43.9 cu-in, 0.719 L
Net Horsepower @ RPM	15 hp, 11.2 Kw @ 2,400 RPM
Travel speeds Low/High	Low: 2.1 km/h, 1.3 mph High: 4.2 km/h, 2.6 mph
Max traction force Low	– lbf, – kg
Gradeability	30 degrees
Ground pressure Canopy/Cab	4.5 psi, 31.1 kpa – psi, – kpa
Pump Type	Gear, 2 port Piston
Pump Flow, Piston	2 x 4.0 gpm, 2 x 15.0 L/min
Pump Flow, Gear	3.0 gpm, 11.3 L/min
System Pressure	2,610 psi, 180 bar
Auxiliary Flow	7.9 gpm, 30 L/m @ 2400 RPM – gpm, – L/m @ – RPM
Operating Weight - Canopy	4,304 lb., 1,953 kg
Operating Weight - Cab	4,475 lb., 2,034 kg *
Overall Height	7 ft. 6 in., 2.30 m
Minimum Overall transport length	12 ft. 1 in., 3.69 m
Width of Upper Structure	3 ft. 3 in., 0.99 m
Track Overall Length	5 ft. 4 in., 1.62 m
Track Overall Width (retracted /extended)	3 ft. 3 in., 0.99 m / 4 ft. 6 in., 1.36 m
Track Shoe Width	9 in., 0.23 m
Center to Center - Idler to Sprocket	4 ft. 2 in., 1.26 m
Upper Structure Ground Clearance	1 ft. 5 in., 0.42 m
Minimum Ground Clearance	– in., – m
Boom Swing Left / Right	80 degrees / 60 degrees
Arm / Stick / Dipper Length Standard Arm Long	– ft. – in., – m – ft. – in., – m
Radius: Standard Counterweight/Additional Counterweight	2 ft. 3 in., 0.68 m – ft. – in., – m
Tail Swing Overhang: Standard Counterweight/Additional Counterweight	0 in., 0 cm – in., – cm
Blade height	9.6 in., 0.235 m
Blade Width: Standard / With Extensions	3 ft. 3 in., 0.98 m 4 ft. 6 in., 1.36 m
Blade: Bottom Highest/Lowest Position	8.7 in., 0.22 m / 8.1 in., 0.204 m
Maximum Dig Radius / Max Reach: Standard Arm / Long Arm	13 ft. 7 in., 4.13 m 14 ft. 2 in., 4.31 m
Maximum Ground Level Dig Radius/Reach: Standard Arm/Long Arm	13 ft. 5 in., 4.09 m 14 ft. 0 in., 4.26 m
Maximum Digging Depth: Standard Arm/Long Arm	7 ft. 10 in., 2.39 m – ft. – in., – m
Maximum Digging Hight: Standard Arm/Long Arm	11 ft. 9 in., 3.57 m – ft. – in., – m
Maximum Dump Hight: Standard Arm/Long Arm	8 ft. 8 in., 2.65 m – ft. – in., – m
Minimum swing radius	5 ft. 3 in., 1.59 m
Arm /Stick Digging Force: Standard Arm/Long Arm	2,331 lbf, 10.4 kN 2,086 lbf, 9.28 kN
Arm/Stick Breakout Force	– lbf, – kN
Bucket Digging Force	4,684 lbf, 20.8 kN
Bucket Breakout Force	– lbf, – kN
Rated Lifting Capacity: 3m (9.8ft) radius, over front, blade down at ground level	1,098 lb, 498 kg
Swing/Slewing Speed	8.2 RPM
Hydraulic Oil Capacity: Tank/System	3.78 gal, 14.3 L 5.0 gal, 19.0 L
Fuel Tank Capacity	5.0 gal, 19.0 L
Engine Oil Capacity, Including Filter	3.5 qt., 3.3 L
Operator Sound Pressure (ISO 6396:2008)	82 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	93 dB(A)
Assumed or not Certain Value	*

Engine	Kubota D-902
Cylinders	3
Displacement	54.8 cu-in, 0.898 L
Net Horsepower @ RPM	15.5 hp, 11.6Kw @ 2300 RPM
Travel speeds Low/High	Low: 2.4 km/h, 1.5 mph High: 4.8 km/h, 3.0 mph
Max traction force Low	– lb., – kg
Gradeability	30 degrees
Ground pressure Canopy/Cab	– psi, – kpa – psi, – kP
Pump Type	Piston
Pump Flow, Piston	11.8 gpm, 44.6 L/m
Pump Flow, Gear	N/A
System Pressure	-psi, – bar
Auxiliary Flow	5.9 gpm, 22.3 L/m @ 2,300 RPM – gpm, – L/m @ – RPM
Operating Weight - Canopy	– lb., – kg
Operating Weight - Cab	– lb., – kg
Overall Height	7 ft. 8 in., 2.34 m
Minimum Overall transport length	– ft. – in., – m
Width of Upper Structure	3 ft. 2 in., 0.97 m
Track Overall Length	5 ft. 0 in., 1.52 m
Track Overall Width (retracted /extended)	3 ft. 2 in., 0.97 m / 4 ft. 2 in., 1.27 m
Track Shoe Width	9.0 in., 0.23 m
Center to Center - Idler to Sprocket	– ft. – in., – m
Upper Structure Ground Clearance	– ft. – in., – m
Minimum Ground Clearance	– in., – m
Boom Swing Left / Right	45 degrees / 45 degrees
Arm / Stick / Dipper Length Standard Arm Long	– ft. – in., – m – ft. – in., – m
Radius: Standard Counterweight/Additional Counterweight	– ft. – in., – m – ft. – in., – m
Tail Swing Overhang: Standard Counterweight/Additional Counterweight	– in., – cm – in., – cm
Blade height	– in., – m
Blade Width: Standard / With Extensions	– ft. – in., – m – ft. – in., – m
Blade: Bottom Highest/Lowest Position	– in., – m / – in., – m
Maximum Dig Radius / Max Reach: Standard Arm / Long Arm	12 ft. 6 in., 3.81 m – ft. – in., – m
Maximum Ground Level Dig Radius/Reach: Standard Arm/Long Arm	11 ft. 4 in., 3.45 m – ft. – in., – m
Maximum Digging Depth: Standard Arm/Long Arm	7 ft. 7 in., 2.31 m – ft. – in., – m
Maximum Digging Hight: Standard Arm/Long Arm	10 ft. 10 in., 3.30 m – ft. – in., – m
Maximum Dump Hight: Standard Arm/Long Arm	7 ft. 11 in., 2.16 m – ft. – in., – m
Minimum swing radius	– ft. – in., – m
Arm /Stick Digging Force: Standard Arm/Long Arm	2,049 lbf, 9.1 kN – lbf, – kN
Arm/Stick Breakout Force	– lbf, – kN
Bucket Digging Force	4,209 lbf, 18.7 kN
Bucket Breakout Force	– lbf, – kN
Rated Lifting Capacity: 3m (9.8ft) radius, over front, blade down at ground level	– lb, – kg
Swing/Slewing Speed	– RPM
Hydraulic Oil Capacity: Tank/System	– gal, – L – gal, – L
Fuel Tank Capacity	5.8 gal 21.9 L
Engine Oil Capacity, Including Filter	– qt., – L
Operator Sound Pressure (ISO 6396:2008)	– dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	– dB(A)

Cat 302 CR Excavator

Reviews

Quick Comparison

Related products

Login